วัสดุที่ใช้ผลิต เม็ดมีดอินเสิร์ท คือ

Last updated: 4 ม.ค. 2565  |  546 จำนวนผู้เข้าชม  | 

วัสดุที่ใช้ผลิต เม็ดมีดอินเสิร์ท มีอะไรบ้าง

มีดกลึง หรือ เม็ดอินเสิร์ท (TURNING INSERTS) คือ เครื่องมือที่ใช้ในการตัดเฉือนชิ้นงานให้เป็นรูปร่างต่างๆ ในขบวนการกลึง materials ที่นิยมใช้ในการผลิตได้แก่
1. เหล็กกล้าคาร์บอนสูง (High Carbon Steel)
2. เหล็กกล้าความเร็วสูง (High Speed Steel : HSS)
3. โลหะผสมที่ไม่ใช่เหล็ก (Cast Nonferrous Alloy)
4. คาร์ไบด์ (Carbide) 
5.เซรามิคส์ (Ceramic) 
6. โบรอนไนไตรด์ Boron Nitride
7. เพชร (Diamond) 

Cutting tool materials are materials that are used to make cutting tools which are used in machining (drill bits, tool bits, milling cutters, etc.) but not other cutting tools like knives or punches.

Cutting tool materials must be harder than the material of the workpiece, even at high temperatures during the process.

The following properties are required for cutting tool

There is no material that shows all of these properties at the same time. Very hard materials, have lower toughness and break more easily. The following cutting tool materials are used:

  • Tool Steels. They are relatively cheap and tough. Their hardness is sufficient to machine other steels
  • Carbon Tool Steels. They lose their hardness at 200 °C
  • High Speed Steels. They lose their hardness at 600 °C, and are widely used in machining. Due to their ability to retain hardness at higher temperature, higher cutting speeds are possible
  • Carbides. Harder than tool steels, but less tough. Can be used up to 900 °C. There are many sort of cemented carbides like ones made of tungsten carbide and cobalt or cermets.
  • Ceramic. They are even harder than cemented carbides but have lower toughness. Aluminium oxide and silicon nitride are used. The latter has higher toughness, but can't be used for machining Steel, due to very high wear.

 

"super hard materials"

  • Cubic Boron Nitride. It is nearly as hard as diamond
  • Diamond. The hardest known material, but can only be used up to 600 °C and can't be used to machine steel

ที่มาของแหล่งข้อมูล https://en.wikipedia.org/wiki/Cutting_tool_material

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้